Free Technical Resource

Technical
Conversion Tools.

Fast, field-friendly pressure, measurement, torque and hydraulic cylinder force calculations. Results update automatically as you type.

‹ Back to Resources

Field Reference Tools

Select Units. Enter a Value. Get the Result.

Use either unit system and switch directions at any time. No information is transmitted or saved.

Pressure

Convert hydraulic and pneumatic pressure between kg/cm², MPa, bar and PSI.

Converted pressure—

Metric & Imperial

Convert common machine dimensions, clearances and axis-travel measurements.

Converted measurement—

Torque

Convert torque units used for machine assemblies, fasteners and service documents.

Converted torque—

Hydraulic Cylinder Force

Calculate theoretical cylinder force from system pressure and cylinder dimensions. Add the rod diameter to calculate retract force.

Extend force — full bore area—
Retract force — annular area—Enter a rod diameter to calculate.
Technical Reference ReminderHydraulic results are theoretical and do not include friction, seal drag or other system losses. Use the equipment manufacturer's torque specification whenever available because required tightening torque changes with bolt grade, thread pitch, plating, lubrication and joint design.